Trapezoidal Roof Roll Forming Machine
VANTOOLS
| Availability: | |
|---|---|
| Quantity: | |
The Trapezoidal Roof Roll Forming Machine is designed to produce trapezoidal ribbed roofing and wall panels such as IBR, AG/PBR and TR4/TR5 profiles. It processes PPGI, PPGL, GI and GL coils into continuous metal panels with consistent rib geometry and dimensional accuracy. With typical forming speeds of 15–35 m/min and optional high-speed configurations up to 40–60 m/min, the machine is suitable for roofing and wall panel production for industrial buildings, warehouses and commercial construction projects.
Multiple Trapezoidal Panel Profiles:The machine can be configured for different trapezoidal profiles, including IBR, AG/PBR and TR4/TR5, according to the required rib height, pitch, effective covering width and panel application.
Wide Material Compatibility:It can process commonly used coated and galvanized steel coils, including PPGI, PPGL, GI and GL, with typical material thicknesses of 0.3–0.8 mm.
Stable Roll Forming Performance:The multi-pass roll forming system gradually shapes the metal coil through approximately 18–26 forming stations, helping maintain consistent panel geometry during continuous production.
Flexible Cutting & Control System:The machine can be equipped with hydraulic stop cutting or servo flying cutting, while PLC, inverter, touchscreen and encoder control systems support automatic length setting and coordinated production.
Configurable Production Line:Optional functions such as protective film application, pre-cutting, automatic stacking and remote diagnostics can be integrated according to production requirements, providing flexibility for different roofing panel manufacturers.
Residential Buildings
Agricultural Buildings
Industrial Warehouse
Steel Structure Factory Building
| Parameter | Specification |
| Machine Type | Trapezoidal Roof Roll Forming Machine |
| Applicable Profiles | IBR, AG/PBR, TR4/TR5 |
| Raw Material | PPGI / PPGL / GI / GL |
| Material Thickness | Approx. 0.3–0.8 mm |
| Optional Thickness Range | Approx. 0.4–1.0 mm, depending on machine |
| Feeding Width | Approx. 914–1450 mm |
| Common Coil Width | 1220 / 1250 mm |
| Forming Speed | Approx. 15–35 m/min |
| High-Speed Configuration | Approx. 40–60 m/min |
| Forming Stations | Approx. 18–26 passes |
| Shaft Diameter | Approx. 75–80 mm |
| Material Strength | Approx. 230–550 MPa |
| Cutting Method | Hydraulic Stop Cutting / Servo Flying Cutting |
| Control System | PLC + Inverter + Touchscreen + Encoder |
| Optional Functions | Protective Film, Pre-Cutting, Automatic Stacking, Remote Diagnostics |
| Applications | Industrial Buildings, Warehouses, Commercial Buildings |
| Equipment / Profile Type | Typical Thickness (mm) | Common Speed (m/min) | Core Value Proposition | Main Risk Points / Notes |
| Corrugated Roof Panel | 0.2–0.8 | 15–25 | Universal, easy to sell | Wave shape / effective width coverage |
| Trapezoidal Roof Panel | 0.3–0.8 | 15–35 | Strength and regional profile shapes | G550 springback (high-strength steel rebound) |
| Double‑Layer Roof Panel | 0.3–0.7 | 12–25 | Two profiles on one machine – saves floor space | Usually cannot run both profiles simultaneously |
| C/Z Purlin | 1.2–3.5 | 12–30 | Structural member, multiple size options | Actual cycle time after punching affects production rhythm |
| Metal Glazed Tile (Decorative Tile) | 0.3–0.6 | 2–10 | High decorative value | Step‑forming speed and scratch prevention are critical |
| Light Gauge Steel Furring / Stud | 0.3–1.5 | 20–50 | High speed, wide variety of profiles | Standards and hole pattern differences must be confirmed |
| Roof Curving / Arc Bender | 0.3–1.2 | 8–16 | Curved surface engineering applications | Minimum radius and profile compatibility limits |
| Ridge Cap / Cover Panel | 0.3–0.8 | 4–25 | Roofing accessory / matching system | Must match main panel profile and roof slope |
Still unsure which machine is right for your production needs? Contact us today. Our engineers will recommend the most suitable machine type and configuration for your project.
Packaging & Transportation
Before shipment, each roll-forming machine is fully wrapped with protective plastic film to help protect the equipment from dust, moisture, scratches, and other potential damage during handling and transportation. Accessories and loose components are packed separately and securely fastened.
During container loading, the machine and its components are carefully arranged to make efficient use of available space. All equipment is firmly secured with straps and supports to minimize movement and prevent collision during transit, helping ensure that the roll-forming machine arrives at the customer’s site safely and in good condition.
We provide a 1-year warranty for the machine.
Video-based technical guidance is available for after-sales support.
Spare parts can be supplied separately at additional cost when required.