+86-190-3115-5679
微信图片_20260904141914_35_23
Home » Products » Roof & Wall Panel Roll Forming Machine » Light Steel Keel Roll Forming Machine » Light Steel Keel Roll Forming Machine for Stud and Track Profiles Manufacturer

loading

Light Steel Keel Roll Forming Machine for Stud and Track Profiles Manufacturer

  • Raw material: Galvanized steel coil
  • Thickness: Typically 0.3–1.5 mm; up to 2–3 mm for heavy-duty special profiles
  • Strip width: Typically ≤150–300 mm (based on the profile's developed width)
  • Speed: Standard lines approx. 20–50 m/min; high-speed lines 60–120 m/min
  • Forming stations: Approx. 10–20 stations
  • Main motor: Approx. 5.5–7.5 kW (total line power increases based on punching/servo configurations)
  • Length tolerance: High-quality lines typically target ±1 mm
  • Light Steel Keel Roll Forming Machine

  • VANTOOLS

Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

Light Steel Keel Roll Forming Machine Introduction

The Light Steel Keel Roll Forming Machine is designed to produce thin-walled steel profiles for ceilings, partition walls, drywall systems, and light steel construction, including C, U, L, F, Omega, Stud, Track, and Furring Channel profiles. It mainly processes galvanized steel coils with common thicknesses of 0.3–1.5 mm. The production line can integrate decoiling, leveling, punching, roll forming, cutting, coding, and automatic collection or packing according to the required profile and production process. Different profile sections, hole patterns, and changeover methods can be configured based on the target market and building standards.

Light Steel Keel Roll Forming Machine Advantages

Multi-Profile Production:The machine can be configured for different light steel keel profiles, including Stud, Track, C/U, L, F, Omega, and Furring Channel, making it suitable for manufacturers serving multiple drywall and ceiling applications.

Integrated Punching and Forming:Punching can be integrated before or during the forming process according to the required hole pattern. The complete line can combine leveling, punching, forming, cutting, and collecting for continuous profile production.

High-Speed Production Options:Standard configurations commonly operate around 20–50 m/min, while high-speed lines can reach approximately 60–120 m/min depending on the profile, material, punching system, cutting method, and collection configuration.

Flexible Cutting Systems:The production line can use stop cutting or servo flying cutting. A no-waste cutting configuration can also be selected for applications where material utilization and continuous production are important.

Profile-Specific Customization:The machine can be designed according to the customer's cross-section drawing, hole pattern, steel thickness, galvanized coating, target speed, and local profile standards, which is particularly important for Stud and Track dimensions that vary between markets.

Light Steel Keel Roll Forming Machine Application Areas

1.Residential buildings

Residential Buildings

2.Agricultural buildings

Agricultural Buildings

3.Industrial Warehouse

Industrial Warehouse

2.steel structure factory building

Steel Structure Factory Building



Light Steel Keel Roll Forming Machine Parameters

Parameter Specification
Product Type Light Steel Keel / Stud / Track / Furring Channel
Applicable Profiles C, U, L, F, Omega, Stud, Track, Furring Channel
Raw Material Galvanized Steel Coil
Material Thickness 0.3–1.5 mm common; 2–3 mm for special heavy-duty profiles
Strip Width Commonly ≤150–300 mm, according to developed profile width
Forming Speed Approx. 20–50 m/min
High-Speed Line Approx. 60–120 m/min
Forming Passes Approx. 10–20 passes
Main Motor Approx. 5.5–7.5 kW; complete line power depends on punching and servo configuration
Length Accuracy Approx. ±1 mm target for high-quality lines
Cutting Method Stop Cutting / Servo Flying Cutting
Punching Optional / Integrated according to profile and hole pattern
Line Configuration Decoiling, Leveling, Punching, Roll Forming, Cutting, Collecting/Packing
Coding Optional
Automatic Collection Optional
Control System PLC Control
Customization Profile Section, Hole Pattern, Material Thickness, Speed and Changeover Method

Model Comparison

Equipment / Profile Type Typical Thickness (mm) Common Speed (m/min) Core Value Proposition Main Risk Points / Notes
Corrugated Roof Panel 0.2–0.8 15–25 Universal, easy to sell Wave shape / effective width coverage
Trapezoidal Roof Panel 0.3–0.8 15–35 Strength and regional profile shapes G550 springback (high-strength steel rebound)
Double‑Layer Roof Panel 0.3–0.7 12–25 Two profiles on one machine – saves floor space Usually cannot run both profiles simultaneously
C/Z Purlin 1.2–3.5 12–30 Structural member, multiple size options Actual cycle time after punching affects production rhythm
Metal Glazed Tile (Decorative Tile) 0.3–0.6 2–10 High decorative value Step‑forming speed and scratch prevention are critical
Light Gauge Steel Furring / Stud 0.3–1.5 20–50 High speed, wide variety of profiles Standards and hole pattern differences must be confirmed
Roof Curving / Arc Bender 0.3–1.2 8–16 Curved surface engineering applications Minimum radius and profile compatibility limits
Ridge Cap / Cover Panel 0.3–0.8 4–25 Roofing accessory / matching system Must match main panel profile and roof slope

Still unsure which machine is right for your production needs? Contact us today. Our engineers will recommend the most suitable machine type and configuration for your project.


About Vantools

Tangshan Vantools Industries Co., Ltd. is located in Tangshan, China’s major steel industry base. We are a professional manufacturer integrating R&D, production, and sales of metal forming machinery, construction fasteners, and garden hand tools. Our main products include roll forming machines, nail making machines, wire drawing machines, bolts, screws, nuts, steel nails, and agricultural tools.

With direct access to local steel resources, we provide cost-effective products, fast delivery, and one-stop sourcing solutions for global customers. We offer customized machinery, OEM services, anti-corrosion fasteners, and professional technical support, including installation, training, and spare parts supply.

Serving construction companies, hardware distributors, and industrial buyers worldwide, Vantools has built long-term partnerships across Southeast Asia, the Middle East, Africa, South America, North America, and Australia. We are committed to delivering reliable products and creating lasting value for our global partners.

Why Choose Us?

Packaging & Delivery

FAQs

  • What Is Your Price? What Trade Terms Do You Offer?
    加 Created with Sketch.
    形状 Created with Sketch.
    The price depends on the machine model and specifications required. Please contact us directly for a customized quotation.
    We offer flexible trade terms, including FOB, CNF, and CIF, according to your requirements.
  • Can You Customize the Profile? Can You Adjust the Voltage to Meet Local Requirements?
    加 Created with Sketch.
    形状 Created with Sketch.
    Yes. We can customize the profile according to your requirements.
    The machine voltage can also be adjusted to meet your local power requirements.
  • What Is the Production Lead Time and Delivery Time?
    加 Created with Sketch.
    形状 Created with Sketch.
    The standard production lead time is approximately 30 days. Please contact us with your requirements so we can confirm the production and delivery schedule.
  • What About the Warranty, After-Sales Support, and Spare Parts?
    加 Created with Sketch.
    形状 Created with Sketch.

    We provide a 1-year warranty for the machine.
    Video-based technical guidance is available for after-sales support.
    Spare parts can be supplied separately at additional cost when required.

  • What Is the Machine Output Speed and Applicable Material Thickness?
    加 Created with Sketch.
    形状 Created with Sketch.
    The machine output speed is approximately 10–20 m/min, depending on the machine model.
    The applicable material thickness is 0.3–0.8 mm.
    Please let us know your required profile, material thickness, and production requirements, and we will recommend a suitable machine type for you.
Previous: 
Next: 

Related Products

Contact Us

Get In Touch

 Yuannan office building ,Lunan District,Tangshan city,Hebei Province,China
 +86-190-3115-5679
 +8619031155679

Product Category

Quick Links

Quick Inquiry
Copyright © 2026 Tangshan Vantools Industries Co., Ltd. All Rights Reserved.   Privacy Policy Sitemap