Glazed Roof Roll Forming Machine
VANTOOLS
| Availability: | |
|---|---|
| Quantity: | |
The Glazed Roof Roll Forming Machine is designed to continuously form metal roofing sheets and create programmed step patterns through hydraulic pressing. It is suitable for producing glazed-style, imitation ceramic tile and stepped metal roof panels commonly used on residential buildings, villas, hotels, and scenic-area architecture. The machine can process pre-painted steel, galvanized steel, and aluminum sheets with typical thicknesses of 0.3–0.6 mm. The step pitch, step depth, and front/rear sheet lengths can be programmed according to the required roof tile profile and production drawing.
Continuous Roll Forming and Step Pressing:The machine combines continuous roll forming with hydraulic step pressing to produce decorative metal roofing panels with a stepped tile appearance, reducing the need for separate forming processes.
Programmable Step Dimensions:The step pitch, step depth, and front/rear lengths can be programmed according to the required profile, providing flexibility for different glazed tile designs and customer specifications.
Suitable for Multiple Metal Materials:The machine can process pre-painted steel, galvanized steel, and aluminum sheets, with common material thicknesses ranging from 0.3–0.6 mm. The actual configuration can be selected according to the material and profile requirements.
Controlled Surface Protection:Optional surface-protection and film-covering configurations can help reduce scratches on pre-painted roofing sheets during forming. The precision of the step-forming dies also contributes to the appearance of finished panels.
Flexible Production Configuration:With forming speeds generally around 2–10 m/min, the machine can be configured for different production requirements. For higher-speed models, the actual finished-product output should be calculated according to the step pitch and hydraulic pressing cycle rather than roll-forming speed alone.
Residential Buildings
Agricultural Buildings
Industrial Warehouse
Steel Structure Factory Building
| Parameter | Specification |
| Product Type | Glazed Roof Tile / Stepped Metal Roof Panel |
| Raw Material | Pre-Painted Steel, Galvanized Steel, Aluminum |
| Material Thickness | 0.3–0.6 mm common; some models 0.3–0.8 mm |
| Feeding Width | 914 / 1000 / 1200 / 1220 / 1250 mm |
| Finished Product Speed | Approx. 2–10 m/min |
| High-Speed Configuration | Approx. 10–15 m/min |
| Forming Passes | Approx. 12–20 passes |
| Main Motor | Approx. 5.5–7.5 kW |
| Hydraulic Power | Approx. 3–5.5 kW |
| Step Pitch | Programmable |
| Step Depth | Programmable |
| Front/Rear Length | Programmable |
| Forming Dies / Cutters | Cr12 / Cr12MoV, quenched |
| Control System | PLC Control |
| Step Forming | Hydraulic Pressing |
| Optional Configuration | Protective Film / Surface Protection |
| Customization | Tile Profile, Effective Width, Step Pitch, Step Depth and Production Configuration |
| Equipment / Profile Type | Typical Thickness (mm) | Common Speed (m/min) | Core Value Proposition | Main Risk Points / Notes |
| Corrugated Roof Panel | 0.2–0.8 | 15–25 | Universal, easy to sell | Wave shape / effective width coverage |
| Trapezoidal Roof Panel | 0.3–0.8 | 15–35 | Strength and regional profile shapes | G550 springback (high-strength steel rebound) |
| Double‑Layer Roof Panel | 0.3–0.7 | 12–25 | Two profiles on one machine – saves floor space | Usually cannot run both profiles simultaneously |
| C/Z Purlin | 1.2–3.5 | 12–30 | Structural member, multiple size options | Actual cycle time after punching affects production rhythm |
| Metal Glazed Tile (Decorative Tile) | 0.3–0.6 | 2–10 | High decorative value | Step‑forming speed and scratch prevention are critical |
| Light Gauge Steel Furring / Stud | 0.3–1.5 | 20–50 | High speed, wide variety of profiles | Standards and hole pattern differences must be confirmed |
| Roof Curving / Arc Bender | 0.3–1.2 | 8–16 | Curved surface engineering applications | Minimum radius and profile compatibility limits |
| Ridge Cap / Cover Panel | 0.3–0.8 | 4–25 | Roofing accessory / matching system | Must match main panel profile and roof slope |
Still unsure which machine is right for your production needs? Contact us today. Our engineers will recommend the most suitable machine type and configuration for your project.
Packaging & Transportation
Before shipment, each roll-forming machine is fully wrapped with protective plastic film to help protect the equipment from dust, moisture, scratches, and other potential damage during handling and transportation. Accessories and loose components are packed separately and securely fastened.
During container loading, the machine and its components are carefully arranged to make efficient use of available space. All equipment is firmly secured with straps and supports to minimize movement and prevent collision during transit, helping ensure that the roll-forming machine arrives at the customer’s site safely and in good condition.
We provide a 1-year warranty for the machine.
Video-based technical guidance is available for after-sales support.
Spare parts can be supplied separately at additional cost when required.