Double Layer Roof Roll Forming Machine
VANTOOLS
| Availability: | |
|---|---|
| Quantity: | |
The Double Layer Roof Roll Forming Machine integrates two roll forming systems into a single machine frame, allowing manufacturers to produce two different roofing or wall panel profiles with shared equipment. Common combinations include trapezoidal + corrugated panels, trapezoidal + wall panels, and trapezoidal + glazed tile profiles. By sharing components such as the decoiler, machine frame, hydraulic system and control system, the machine can reduce floor space and equipment investment. The two forming layers are normally operated separately rather than producing both profiles simultaneously.
Two Panel Profiles in One Machine:The machine combines two independent roll forming paths in one frame, allowing manufacturers to produce two different panel profiles according to their product range.
Reduced Floor Space:By integrating two forming systems into a single machine structure, it requires less installation space than two separate roll forming lines, making it suitable for factories with limited workshop space.
Lower Equipment Investment:The two forming systems can share key components such as the decoiler, hydraulic system, machine frame and control system, helping reduce the overall equipment investment compared with purchasing two complete production lines.
Flexible Profile Combinations:Typical combinations include trapezoidal + corrugated, trapezoidal + wall panel and trapezoidal + glazed tile, allowing manufacturers to select configurations according to their local market requirements.
Suitable for Multiple Roofing Markets:The machine can process common PPGI, GI and pre-painted steel coils and is suitable for small and medium-sized building-material manufacturers producing different roofing profiles within one production facility.
Residential Buildings
Agricultural Buildings
Industrial Warehouse
Steel Structure Factory Building
| Parameter | Specification |
| Machine Type | Double Layer Roof Roll Forming Machine |
| Forming Systems | Two Roll Forming Layers |
| Applicable Materials | PPGI / GI / Pre-painted Steel Coil |
| Material Thickness | Approx. 0.3–0.7 mm |
| Feeding Width | 1000 / 1220 / 1250 mm, depending on profiles |
| Forming Speed | Approx. 12–25 m/min |
| High-Speed Configuration | Approx. 30–36 m/min |
| Forming Stations | Approx. 16–24 passes per layer |
| Main Motor Power | Approx. 7.5–15 kW |
| Cutting System | Shared or Independent Hydraulic Cutting |
| Typical Profile Combinations | Trapezoidal + Corrugated / Trapezoidal + Wall Panel / Trapezoidal + Glazed Tile |
| Machine Dimensions | Approx. 10–14 × 1.6–2.2 × 2.2 m |
| Machine Weight | Approx. 11–18 t for heavy-duty models |
| Control System | PLC-based Control System |
| Operation Mode | Normally one forming layer operates at a time |
| Equipment / Profile Type | Typical Thickness (mm) | Common Speed (m/min) | Core Value Proposition | Main Risk Points / Notes |
| Corrugated Roof Panel | 0.2–0.8 | 15–25 | Universal, easy to sell | Wave shape / effective width coverage |
| Trapezoidal Roof Panel | 0.3–0.8 | 15–35 | Strength and regional profile shapes | G550 springback (high-strength steel rebound) |
| Double‑Layer Roof Panel | 0.3–0.7 | 12–25 | Two profiles on one machine – saves floor space | Usually cannot run both profiles simultaneously |
| C/Z Purlin | 1.2–3.5 | 12–30 | Structural member, multiple size options | Actual cycle time after punching affects production rhythm |
| Metal Glazed Tile (Decorative Tile) | 0.3–0.6 | 2–10 | High decorative value | Step‑forming speed and scratch prevention are critical |
| Light Gauge Steel Furring / Stud | 0.3–1.5 | 20–50 | High speed, wide variety of profiles | Standards and hole pattern differences must be confirmed |
| Roof Curving / Arc Bender | 0.3–1.2 | 8–16 | Curved surface engineering applications | Minimum radius and profile compatibility limits |
| Ridge Cap / Cover Panel | 0.3–0.8 | 4–25 | Roofing accessory / matching system | Must match main panel profile and roof slope |
Still unsure which machine is right for your production needs? Contact us today. Our engineers will recommend the most suitable machine type and configuration for your project.
Packaging & Transportation
Before shipment, each roll-forming machine is fully wrapped with protective plastic film to help protect the equipment from dust, moisture, scratches, and other potential damage during handling and transportation. Accessories and loose components are packed separately and securely fastened.
During container loading, the machine and its components are carefully arranged to make efficient use of available space. All equipment is firmly secured with straps and supports to minimize movement and prevent collision during transit, helping ensure that the roll-forming machine arrives at the customer’s site safely and in good condition.
We provide a 1-year warranty for the machine.
Video-based technical guidance is available for after-sales support.
Spare parts can be supplied separately at additional cost when required.